Licensed & Insured, in Minneapolis and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Minneapolis
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (612) 326-1892 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Minneapolis and surrounding areas · On-site visits included · Free estimate within 24h
Minneapolis Metal Roofing is a team of local certified professionals based in Minneapolis. We respond quickly in Minneapolis and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (612) 326-1892⭐⭐⭐⭐⭐ 4.9/5 · 253 verified Google reviews
“Our old barn roof was rusted through in spots and we figured it was a goner. These guys came out, walked the whole thing with me, and had new corrugated panels on the entire 60-foot span in three days. The crew even swept the hayloft floor clean of every last screw and scrap. Honestly didn't expect that kind of care on a farm job.”
Commercial & Agricultural Metal Roofing
“The copper turret on our 1890s Victorian had been patched so many times it looked like a quilt. They tore it down to the deck and rebuilt it in standing seam copper, soldered the seams by hand, and matched the original profile exactly. Pricey, sure, but the house finally looks right again after decades of ugly fixes.”
Copper & Specialty Metal Roofing
“We needed a metal roof on a new equipment shed out past the county line and most outfits wouldn't even drive out there. Minneapolis Metal Roofing quoted it fair, showed up when they said, and the ribbed panels went up straight and square. Small gripe is they left a pile of trim scraps by the fence that I had to haul off myself, but the roof itself is solid.”
Commercial & Agricultural Metal Roofing
“I called about leaves piling up in my front yard and clogging everything, and they set me straight, the real problem was my old gutters weren't sized right for the metal roof runoff. They installed proper seamless gutters with leaf guards and the yard has stayed clear through two big storms since. Not what I originally called about, but exactly what I needed.”
Gutters for Metal Roofs
“We had a persistent leak right where the vent pipe comes through our metal roof, and two other companies just globbed sealant on it. This crew pulled the old flashing, replaced it properly with new boots and seals, and we've had zero drips through a full rainy month. Should've called them the first time.”
Flashing, Chimney & Skylight Repair
“Full tear-off and replacement on our 1970s split-level, about 2,000 square feet. They hauled away three layers of old shingles and had the new standing seam done in under a week, and you couldn't find a single nail in the lawn afterward. The foreman texted me photos at the end of each day, which I really appreciated.”
Metal Roof Replacement
“We went with the retrofit over our existing shingles to save money and I was nervous about it, but the crew explained the whole strapping and underlayment process before they started. Two days, no mess, and the house is noticeably quieter in the rain now. Wish I'd done it years ago.”
Metal Roof Over Shingles (Retrofit)
“Our Tudor needed a roof that matched the neighborhood's look, and the stone-coated steel they recommended was the perfect call, looks like shake from the street, but it's steel underneath. Install took about four days with a three-man crew. Only complaint is the schedule slipped a week due to a material delay, but they kept me posted the whole time and the finished roof is gorgeous.”
Stone-Coated Steel RoofingReal photos of our work in Minneapolis · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel installation | Starting at $8/sq ft | Includes tear-off, underlayment, washered fasteners and basic flashing on a walkable roof. |
| Standing seam installation | Starting at $13/sq ft | Concealed clips, cut-to-length panels and detailed flashing; steep pitch and dormers raise it. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Includes interlocking panels or coated tiles plus hip, ridge and valley trim detailing. |
| Complex or large-scale roof | On estimate | Cut-up rooflines, multiple chimneys and skylights need an on-site layout before pricing. |
| Travel | Included | In Minneapolis and surrounding Twin Cities areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (612) 326-1892, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Includes tear-off, underlayment, panels and standard trim on a simple gable roof with good access. |
| Mechanically seamed standing seam | Starting at $13/sq ft | Includes power-seamed panels for maximum wind and water resistance on steeper Minneapolis roof pitches. |
| Complex cut-up roofline | On estimate | Multiple valleys, dormers and chimney chases need an on-site measure before we quote a number. |
| Standing seam over existing shingles | On estimate | Retrofit with sub-framing; price depends on existing layer count and whether code allows a recover. |
| Travel | Included | In Minneapolis and surrounding suburbs, no separate call-out or mileage fee on any estimate. |
| Estimate | Free | Response within 24 hours at (612) 326-1892, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and replacement, standard profile | Starting at $9/sq ft | Includes tear-off, haul-away, deck inspection, underlayment, and new metal system; pitch and access move the price. |
| Standing seam replacement | Starting at $12/sq ft | Concealed-fastener panels, new flashing, and ice-and-water shield; complex rooflines and panel length add cost. |
| Metal shingle or stone-coated steel replacement | Starting at $11/sq ft | Interlocking panels that mimic shingle look; historic district or HOA approval may affect material choice. |
| Decking repair and ice-dam rot | On estimate | Priced per sheet after tear-off reveals the damage; we photograph and confirm before replacing sheathing. |
| Travel | Included | In Minneapolis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing shingles, basic panel | Starting at $7/sq ft | Includes separation layer, fasteners, standard flashings, and labor on a simple gable roof. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed fasteners on purlins, premium flashings, and clean lines on visible slopes. |
| Stone-coated steel or metal shingle retrofit | Starting at $12/sq ft | Granule-coated or stamped panels for HOA and historic-district homes with traditional looks. |
| Deck repair or framing reinforcement | On estimate | Needs an attic and deck inspection before we can price the repair scope honestly. |
| Travel | Included | In Minneapolis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, seams, small flashing) | Starting at $450 | Covers inspection, a handful of fastener replacements, and resealing one or two seams or small flashing details. |
| Panel replacement | Starting at $750 | One dented or punctured panel replaced and resealed; price rises with panel size and roof pitch. |
| Flashing rebuild (chimney or skylight) | Starting at $650 | Full rebuild of failed flashing with new metal and proper laps; complex details push the price higher. |
| Storm or hail damage repair | On estimate | Scope varies with the number of damaged panels, so we need an on-site look before quoting. |
| Travel | Included | in Minneapolis and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic leak repair | Starting at $450 | Includes diagnostic inspection, simple fix (pipe boot or screws), and water test to confirm. |
| Flashing rebuild | Starting at $750 | Includes removal and rebuild of chimney, skylight, or wall flashing with new metal and sealant. |
| Seam or panel repair | Starting at $650 | Includes seam re-sealing or panel section replacement, priced by linear footage and access difficulty. |
| Emergency tarping | Starting at $350 | Includes temporary tarp installation after storm or thaw, credited toward permanent repair if booked within 30 days. |
| Complex or large-scale job | On estimate | Multiple leaks, rotted decking, or steep access require an on-site inspection before pricing. |
| Travel | Included | In Minneapolis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw replacement | Starting at $750 | Covers a single roof run with moderate fastener failure, including new screws and UV-resistant washers. |
| Full-panel re-fastening | Starting at $1,450 | Replaces every fastener across a panel run, priced by roof size, pitch, and total fastener count. |
| Oversized screw re-fastening | Starting at $1,100 | Steps up a screw gauge where original holes are stripped, common on older corrugated roofs. |
| Re-fastening with lap sealing | On estimate | Combines fastener replacement with lap and penetration sealing, needs an on-site look before pricing. |
| Travel | Included | in Minneapolis and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof installation (garage or shed) | Starting at $5.50/sq ft | Includes panels, fasteners, closures, and standard trim; price rises with roof pitch and deck repairs. |
| Ribbed (R-panel) roof installation (pole barn or workshop) | Starting at $6.25/sq ft | Includes heavier-gauge panels, screw pattern for wind zone, and ridge and eave closures. |
| 5V crimp panel roof (agricultural building) | Starting at $6.75/sq ft | Includes classic V-rib panels and trim; cost moves with building height and access. |
| Retrofit over existing shingles (garage or outbuilding) | Starting at $7.00/sq ft | Includes purlins or strapping over old roof, panels, and fasteners; deck condition affects price. |
| Complex or large-scale job | On estimate | Complex rooflines, multiple penetrations, or structural repairs need an on-site look before we quote. |
| Travel | Included | in Minneapolis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement, standard pitch | Starting at $9/sq ft | Includes tear-off of one layer, synthetic underlayment, ice barrier and standard flashing. |
| Metal shingle roof with complex roofline | Starting at $12/sq ft | Valleys, dormers and multiple penetrations add labor and custom flashing time. |
| Slate-look or shake-look premium profile | Starting at $14/sq ft | Textured premium panels cost more per square than basic architectural profiles. |
| Class 4 hail-rated upgrade | Add 10 to 15 percent | Heavier gauge and reinforced interlock raise material cost but improve hail resistance. |
| Complex or large-scale job | On estimate | Steep pitches, historic district review or two-layer tear-off need an on-site look first. |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel install, simple gable | Starting at $9/sq ft | Includes tear-off of one shingle layer, underlayment, panels, and standard trim on an accessible roof. |
| Stone-coated steel install, complex roofline | Starting at $12/sq ft | Covers multiple valleys, dormers, and steep pitch work; complexity and flashing count move the price. |
| Retrofit over existing shingles | Starting at $10/sq ft | Batten system over one sound shingle layer; deck condition and layer count affect the final number. |
| Repair and re-fastening | On estimate | Panel count, hail or wind damage extent, and access determine scope before a firm number is given. |
| Travel | Included | In Minneapolis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent and detail work | Starting at $20/sq ft | Hand-formed caps, valleys and porch panels; pitch and access move the price. |
| Full architectural copper roof | Starting at $35/sq ft | Standing-seam or flat-lock copper, new underlayment and flashing included. |
| Zinc and aluminum specialty panels | Starting at $24/sq ft | Formed panels and trims; profile complexity and color choice affect cost. |
| Repair and re-flash | On estimate | Solder repairs and new copper flashing; scope needs an on-site look. |
| Snow guards and ice protection | On estimate | Copper-compatible guards sized to pitch, roof area and walkway exposure. |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic coating, sound roof | Starting at $2.50/sq ft | Includes wash, light prep, and one coating pass on a clean, low-rust roof. |
| Rust treatment plus coating | Starting at $3.25/sq ft | Adds rust converter, bare-metal priming, and fastener re-sealing on corroded panels. |
| Reflective cool-roof coating | Starting at $3.75/sq ft | Light-colored reflective system for low-slope and commercial panels in full sun. |
| Steep or complex roofline | On estimate | Rigging, safety setup, and cut-up rooflines need an on-site look before pricing. |
| Travel | Included | In Minneapolis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration flashing repair | Starting at $600 | New custom-bent metal, sealant, and water test for one chimney, skylight, or pipe. |
| Chimney reflashing | Starting at $850 | Counterflashing and step flashing rebuilt in metal, priced by chimney size and roof pitch. |
| Skylight curb reflash | Starting at $750 | New curb flashing and back pan, with cost rising if the curb needs rebuilding. |
| Valley or dormer transition | On estimate | Complex geometry and deck condition need an on-site look before we quote a number. |
| Travel | Included | In Minneapolis and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (612) 326-1892, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards over one entry or driveway | Starting at $1,200 | Includes guards, sealed fasteners, and installation on standard pitch with normal access |
| Snow rails on steep roof sections | Starting at $1,850 | Continuous rail system sized to pitch and snow load, priced by linear foot |
| Full roof retention layout | On estimate | Complex cut-up rooflines with multiple shed zones need an on-site layout and hardware count |
| Eave and ventilation correction | On estimate | Attic venting and eave detail work quoted after inspection of the ice dam source |
| Travel | Included | in Minneapolis and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic check with photo documentation, no obligation to book the repair. |
| Screw replacement and reseal | Starting at $350 | Pulls and replaces backed-out or rusted fasteners on exposed-fastener panels, reseals each hole. |
| Panel or section replacement | Starting at $1,200 | Includes matching panel profile and color; price rises with roof pitch, height and access. |
| Flashing and seam repair | Starting at $450 | Rebuilds failed flashing at chimneys, skylights and valleys, re-crimps lifted seams. |
| Insurance claim documentation | Included | Photo set, measurements and adjuster meeting included with any repair we perform. |
| Full storm replacement | On estimate | Needs an on-site look at panel field, deck condition and scope before a number is given. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential metal roof inspection | Free estimate | Includes on-roof review, fastener and flashing check, and written findings with photos. |
| Pre-purchase or insurance documentation inspection | Starting at $250 | Detailed photo report and remaining service life statement for buyers and adjusters. |
| Large or complex roof inspection | On estimate | Steep pitch, multiple levels, or cut-up rooflines need an on-site look before pricing. |
| Travel | Included | in Minneapolis and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes on-site forming and hidden hangers; price rises with roof pitch and run length |
| Steel gutter with heavy-duty hangers | Starting at $14/linear ft | Includes reinforced hangers for snow slide; steeper roofs and long spans move the number up |
| Heated cable and snow guard package | On estimate | Needs a roof walk to map slide zones and cable runs before pricing |
| Downspout replacement and extensions | Starting at $22/linear ft | Includes oversized downspouts and extensions; distance from foundation drives the total |
| Travel | Included | In Minneapolis and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and repair assessment | Free estimate | On-site inspection of panels, fasteners and flashing, written findings with photos included |
| Screw replacement and re-fastening | Starting at $450 | New screws and washers on aging panels, priced by roof square footage and access |
| Exposed-fastener panel install | Starting at $4.50 per sq ft | Ribbed or corrugated steel with washers, trim and flashing, priced by pitch |
| Standing seam install | Starting at $9 per sq ft | Concealed-clip panels with raised seams, underlayment and trim, priced by pitch |
| Complex or large-scale job | On estimate | Churches, multi-building sites and steep or high-access roofs need an on-site look |
| Estimate | Free | Response within 24h at (612) 326-1892, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Minneapolis need a crew that understands this city's steep gabled roofs, heavy tree canopy, and the aging screw-down panels common on homes across Powderhorn, Longfellow, Seward, and Northeast. Minneapolis Metal Roofing is your local source for metal roof installation, full replacement, re-roofs, and repairs on the steep pitches and complex rooflines found throughout Minneapolis, St. Paul, Bloomington, Edina, and St. Louis Park.
Our network of licensed, insured local contractors works on everything from 1890s Queen Annes and Craftsman bungalows to modern suburban homes with cut-up rooflines in Maple Grove and Woodbury. We know the deep snow loads, freeze-thaw cycles, and ice dams that punish fasteners and flashing here, and we know when a repair is the honest answer and when replacement makes more sense.
Metal roofs leak for a handful of predictable reasons. On the large stock of 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, letting water slip past the screw head. Seams separate as panels expand and contract with thermal movement. Pipe boots, chimney and skylight flashing, and valley details fail over time. Wind can lift and peel panels after a straight-line storm, and fallen elm or maple limbs puncture panels outright. Each of these is fixable, and each gets worse when ignored: water tracks along purlins and decking far from the entry point, rots sheathing, and damages insulation before a stain ever shows on your ceiling.
Our metal roof repair work starts with finding the actual source, not just the wet spot. Often a full screw replacement and re-fastening with new sealing washers restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right call. When seams, flashing, or punctures are the problem, our metal roof leak repair team addresses the detail and verifies it holds.
If you have an active leak, wind damage, or a roof that has been patched one too many times, call (612) 326-1892 or request a free estimate. We will give you a straight repair-versus-replace recommendation based on the condition of the panels, fasteners, and decking, not on what sells the biggest job.
We install the full range of metal systems and match the roof to the home rather than the other way around. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a clean, premium roof with no exposed screws to maintain, and it is the right choice for many Minneapolis homes that plan to stay put. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, workshops, and budget-conscious re-roofs. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front and has no exposed fasteners to service, while screw-down costs less and needs its fasteners checked and replaced over its life. Where the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate way to save on tear-off; where the deck is soft or layered, a full tear-off and Metal Roof Replacement is the correct path.
Metal roof projects are typically quoted per square foot for installations, while repairs are often priced as flat-rate line items. Pricing depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access around landscaping, chimneys, and skylights. We publish typical ranges on our pricing page so you can plan, but final pricing depends on the roof and site conditions after an on-site look.
Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer. To get a real number, request a free estimate or a free roof inspection and we will walk the roof with you and explain the options in plain terms.
After a hail or wind event, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color choices on some Minneapolis homes.
We are glad to point you toward the right office, but permitting rules are set locally and change. Requirements vary, always verify with the Minneapolis building or planning department before starting your project. If you would like to discuss scope, documentation, or scheduling, contact us and we will answer your questions directly.
Ready to get started? Minneapolis Metal Roofing serves in Minneapolis and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Minneapolis · Response within 24h · No commitment · ☎ (612) 326-1892
Your Free Quote Request