Serving the Minneapolis area  ·  (612) 326-1892  ·  Open Mon-Sun 7am-7pm
📞 (612) 326-1892 Free Quote

Metal Roofing in Minneapolis, MN (55404) · Local Professionals

Minneapolis Metal Roofing · Fast response in Minneapolis and the Minneapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+253Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Minneapolis is a city of steep gables, deep snow loads, and ice dams that form at the eaves of Powderhorn Victorians and Longfellow bungalows. If your roof is leaking, lifting, or just old, you are not alone. We install and repair metal roofs built for this climate.

Minneapolis Metal Roofing is based right here in Minneapolis, serving 55404 and the surrounding neighborhoods. From the Queen Anne homes of Whittier to the brick ramblers of Nokomis, we know how local roofs fail and how to fix them for good. Call (612) 326-1892 for a free estimate.

Metal Roofing in Minneapolis (55404)

Minneapolis sits on glacial terrain around the Mississippi River and the Chain of Lakes, with clay-loam soil and mature elms, maples, and oaks that drop limbs and fill gutters. The housing stock ranges from 1890s Queen Anne and Victorian homes with steep hipped roofs in Powderhorn and Seward to 1930s Cape Cods and low-pitched brick ramblers in Nokomis and Windom. Each roof type has its own challenges: steep pitches need proper snow guards, low slopes need careful flashing, and historic districts can restrict panel profiles and colors. Our crews handle tight lot access in Northeast and Whittier, and we know how to protect landscaping while working around Minnehaha Creek and the lakes.

We have installed and repaired metal roofs across Minneapolis and the surrounding area for years. Whether it is a standing seam roof on a Kenwood Tudor or a corrugated panel on a Northeast warehouse, we bring the right tools and experience.

Our services in Minneapolis

How a Job Works in Minneapolis

Step 1: Call us at (612) 326-1892 or request a free on-site assessment. We inspect your roof, check for ice dams, failed fasteners, and flashing gaps, and give you a written estimate. We also help document damage for insurance claims if needed.

Step 2: Once you approve, we pull the required permits from the City of Minneapolis and schedule the work. Most residential roofs take one to three days, depending on size and complexity. We coordinate with HOA design review if your neighborhood requires it, and we respect property lines and neighbor concerns.

Step 3: We clean up thoroughly, haul away all debris, and walk the property with you to make sure you are satisfied. We leave your yard and driveway as clean as we found them.

Metal roofing in Minneapolis is priced by the square foot, and most homeowners want a ballpark before we visit. Installation starts at $8 per square foot for basic panels, standing seam at $10, and replacement at $9. If you are retrofitting over existing shingles, that starts at $7. Repairs like leak fixes start at $450, and screw replacement starts at $750. Snow guards start at $1,200. Costs vary with roof size, pitch, access, and condition. Call (612) 326-1892 for a free, no-pressure estimate.

My 1920s bungalow in Powderhorn has ice dams every winter. Will a metal roof help?
Yes. Metal roofs shed snow more effectively than shingles, especially when paired with proper attic insulation and ventilation. We often install snow guards to keep snow from sliding off in sheets and damaging gutters or landscaping. We will assess your attic and roof pitch to recommend the right system.
A storm just blew through Northeast and lifted some panels on my roof. Can you respond quickly?
We prioritize storm damage calls. Call (612) 326-1892 and we will schedule an inspection, often within 24 to 48 hours. We can tarp or secure the roof temporarily and provide a detailed estimate for permanent repairs.
What does a typical metal roof replacement cost in Minneapolis?
Most full replacements run between $9 and $12 per square foot installed, depending on material and complexity. A 1,500 square foot roof might range from $13,500 to $18,000. We give you a firm quote after inspecting your roof and discussing options.
Do I need a permit for a metal roof in Minneapolis?
Yes, most full replacements and re-roofs require a permit from the City of Minneapolis. Requirements vary by project scope, so check the City of Minneapolis website or call the building department. We handle the permitting process for you and ensure inspections are scheduled.
My HOA requires approval for exterior changes. Can you help with that?
We can provide color samples, product specifications, and installation details for your HOA submission. We recommend getting approval before signing a contract. We are also familiar with historic district guidelines in areas like Lowry Hill and Kenwood.
Are you insured for work on my Minneapolis property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Minneapolis?
Inspect fasteners and seals annually, especially after winter. Clear debris from gutters and valleys to prevent ice dams. We offer inspection and maintenance plans to keep your roof in top shape.
Why choose us?

Trusted professionals in Minneapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Minneapolis

All your work handled by qualified professionals in Minneapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

253+ Verified Client Reviews in Minneapolis

⭐⭐⭐⭐⭐ 4.9/5 · 253 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Minneapolis · Response within 24h · No commitment · ☎ (612) 326-1892

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Minneapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm