Serving the Minneapolis area  ·  (612) 326-1892  ·  Open Mon-Sun 7am-7pm
📞 (612) 326-1892 Free Quote

Metal Roofing in Stillwater, MN (55082) · Local Professionals

Minneapolis Metal Roofing · Fast response in Stillwater and the Minneapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+253Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Stillwater's hillside streets above the St. Croix River are lined with steep-roofed Victorian and Queen Anne homes, and those roofs take a beating every winter. If you live in the 55082 ZIP code, you already know that snow and ice do not slide off a steep pitch the way they do on a flat suburban ranch.

We are Minneapolis Metal Roofing, and we have worked on roofs from South Hill down to the flats near Lowell Park. When a homeowner on North Hill calls us because of an ice dam or a wind-lifted panel, we know the terrain and the building stock before we pull up. We are fully insured and we specialize in metal roofing for exactly this kind of climate.

Metal Roofing in Stillwater (55082)

Stillwater is built on a bluff, and that changes everything about a roofing job. Many homes sit on narrow lots with steep driveways and limited staging space, so we plan material drops carefully and often carry panels by hand to avoid damaging landscaping or blocking the alley. The historic homes near downtown often have complex rooflines with multiple gables, dormers, and chimneys, which means more flashing details and more opportunity for leaks if the work is rushed. Older houses may have original skip sheathing or multiple layers of shingles underneath, and we check that before recommending a retrofit. Hillside lots also mean water runs fast toward the foundation, so we pay attention to gutter sizing and downspout placement, not just the roof surface.

Our team has installed standing seam, metal shingle, and stone-coated steel on homes throughout Stillwater and the surrounding Minneapolis area. We know how snow behaves on a 12/12 pitch above the St. Croix, and we know which profiles shed ice best on a north-facing slope that never sees winter sun. If your home is in a historic district, we can walk you through panel profiles and colors that meet design review requirements.

Our services in Stillwater

How a Job Works in Stillwater

Step 1: You call us at (612) 326-1892 or request a free estimate online. We schedule an on-site assessment, and we look at the roof, the attic if accessible, the flashing, and the gutters. We also check for signs of ice damming at the eaves, which is common on Stillwater's steep roofs. You get a written scope and a clear price before any work starts.

Step 2: We pull the required roofing permit with the City of Stillwater and coordinate any historic district or HOA review if your property falls under one. On tight hillside lots, we stage materials in the driveway or on the street according to city rules, and we protect landscaping with tarps and plywood. Our crews are fully insured, and we keep the job site secure each evening.

Step 3: When the work is done, we walk the property with you, magnet-sweep for nails, and haul away all debris. We do not consider the job finished until you have inspected the roof and the cleanup yourself.

Pricing in Stillwater depends on pitch, access, and the condition of the existing roof. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and standing seam starts around $10 per square foot. A metal roof repair or leak repair typically starts around $450, while screw replacement and re-fastening starts around $750. Snow guards and ice protection start around $1,200, which is money well spent on a steep Stillwater roof. Copper and specialty metal roofing starts around $20 per square foot. The biggest cost factors are roof size, number of penetrations, staging difficulty on a hillside lot, and whether we are repairing or replacing. Call (612) 326-1892 for a free estimate specific to your property.

My Victorian on South Hill has a steep slate roof with ice dams every winter. Can metal roofing help?
Yes. On steep pitches like yours, standing seam with a snow guard system is often the best fix. The metal sheds snow in controlled slides rather than letting meltwater refreeze at the eaves. We also check attic insulation and ventilation, because ice dams are usually a heat-loss problem as much as a roofing problem. We can match a profile that respects the historic character of your home.
A storm just peeled back panels on my roof near Lowell Park. How fast can you respond?
We offer free storm and wind damage inspections and prioritize active leaks and exposed roofs. Call (612) 326-1892 and describe the damage. We will schedule an assessment, tarp or secure the area if needed, and give you a written repair scope. We document damage for insurance purposes, though coverage decisions are always up to your insurer.
What does a typical metal roof replacement cost for a 1,500 square foot home in 55082?
For a home that size with moderate pitch and decent access, a standing seam replacement often lands in the range of $15,000 to $25,000, while a corrugated panel roof or a retrofit over existing shingles can be less. Steep hillside lots, multiple dormers, and historic review can add to the cost. We give firm numbers after a free on-site assessment.
Do I need a permit from the City of Stillwater for a metal roof replacement?
In most cases yes, a roofing permit is required for a full replacement or re-roof, and inspection requirements vary. If your home is in a historic district, design review may also apply. We handle the permit application and coordinate inspections with the city. Rules change, so we always confirm current requirements with the building department before scheduling.
My neighbor's tree branches hang over my roof line. Who is responsible, and does an HOA need to approve my new roof color?
Property line and tree disputes are civil matters between neighbors, so we recommend documenting the overhang and talking with your neighbor first. If your Stillwater property is in an HOA, you will likely need architectural review approval for panel profile and color before installation. We can provide product specs and color samples to support your application.
Is your crew covered by insurance if someone gets hurt on my property?
Yes. We are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Stillwater's climate?
Plan on an annual inspection, ideally in late fall before snow flies. We check fasteners for backing out, clear gutters and downspouts, look for sealant wear at flashing and penetrations, and confirm snow guards are secure. After a heavy hail or wind event, a quick inspection is worth it. Catching a loose fastener early prevents a leak later.
Why choose us?

Trusted professionals in Minneapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Minneapolis

All your work handled by qualified professionals in Minneapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

253+ Verified Client Reviews in Minneapolis

⭐⭐⭐⭐⭐ 4.9/5 · 253 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Minneapolis · Response within 24h · No commitment · ☎ (612) 326-1892

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Minneapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm