Serving the Minneapolis area  ·  (612) 326-1892  ·  Open Mon-Sun 7am-7pm
📞 (612) 326-1892 Free Quote

Metal Roofing in Richfield, MN (55423) · Local Professionals

Minneapolis Metal Roofing · Fast response in Richfield and the Minneapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+253Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Richfield's compact Cape Cods and ramblers, many built in the 1940s and 1950s near the airport and along Penn Avenue, are showing their age on top. If your shingle roof is curling, losing granules, or leaking into the attic, a metal roof is the long-term fix that handles our snow loads, ice dams, and hail without constant patching.

Homeowners in ZIP 55423 call Minneapolis Metal Roofing because we know these low-pitched roofs and tight lots. We have worked on homes near Wood Lake Nature Center and around the Hub Shopping Center, and we understand the freeze-thaw cycles that punish eaves every winter. Our insured crews handle metal roof over shingles (retrofit) and metal roof repair, so you get a roof that sheds snow and stands up to Twin Cities weather.

Metal Roofing in Richfield (55423)

Richfield is mostly flat to gently rolling, with clay-loam soil that stays wet in spring and can shift under downspouts if drainage is poor. The housing stock here is dominated by 1930s to 1950s Cape Cods and brick ramblers with low-slope shingle roofs, often on compact lots with mature trees. That means two things for metal roofing: first, low slopes need careful panel selection and flashing details to prevent leaks, especially around chimneys and skylights; second, tight side yards and driveways make material staging and ladder access tricky, so we plan deliveries and use compact equipment. Ice dams are the big enemy at the eaves on these homes, and metal roofing with proper underlayment and snow guards is a proven solution. We also see wind-lifted panels after summer thunderstorms and punctures from fallen limbs, which we repair promptly.

Our team has installed and repaired metal roofs across Richfield and the surrounding Minneapolis area, from standing seam on larger homes to corrugated panels on garages and porches. We know the local building department requirements and can help you navigate permits for a full replacement or re-roof.

Our services in Richfield

How a Job Works in Richfield

Step 1: Call us at (612) 326-1892 or request a free on-site assessment. We will inspect your existing roof, check the attic and flashing, and discuss options like metal roof over shingles (retrofit) or a full tear-off. You get a written estimate with clear pricing.

Step 2: Once you approve, we schedule the work and handle permit paperwork with the City of Richfield. On tight lots, we coordinate material drops to avoid blocking neighbors' driveways. If your home is in a historic district or HOA, we help with design review so panel profile and color meet the rules. Our crews are fully insured and follow manufacturer specs for a weathertight install.

Step 3: After installation, we clean up thoroughly, haul away old materials, and walk the property with you to make sure you are satisfied. We leave your yard and gutters clean, and we stand behind our work.

Pricing for metal roofing in Richfield depends on the size and pitch of your roof, access, and the condition of the existing deck. As a ballpark, metal roof over shingles (retrofit) starts around $7 per square foot, metal roof installation around $8, and standing seam around $10. Metal roof repair starts at $450, and leak repair also starts at $450. Screw replacement and re-fastening starts at $750. For a typical 1,200 to 1,500 square foot rambler, a retrofit might run $8,000 to $12,000, while a full standing seam replacement could be $15,000 to $25,000. We provide free estimates and explain all cost factors, including permit fees and any needed flashing or gutter work. Call (612) 326-1892 to schedule yours.

My 1950s rambler near Wood Lake has a low-pitch roof. Can you install metal over the existing shingles?
Yes, metal roof over shingles (retrofit) is often a good fit for low-slope ramblers, but we first check the number of existing layers and deck condition. Richfield code limits how many layers you can have, so we verify that during the free inspection. We also ensure proper underlayment and flashing to prevent leaks on low slopes.
How fast can you respond to storm damage in Richfield?
We prioritize storm and wind damage calls in Richfield and surrounding areas. Call (612) 326-1892 and we will schedule an inspection, often within 24 to 48 hours depending on demand. We provide free inspections and can tarp active leaks if needed.
What does a typical metal roof repair cost in Richfield?
Most repairs start at $450, such as fixing a leak or replacing flashing. Screw replacement and re-fastening starts at $750. The final cost depends on the extent of damage, roof access, and materials needed. We give you a clear estimate before any work begins.
Do I need a permit for a metal roof in Richfield?
Yes, a roofing permit is typically required for a full replacement or re-roof in Richfield. Requirements and fees vary, so we confirm with the City of Richfield building department before starting. We handle the permit application as part of our service.
My neighbor's tree hangs over my roof. What are the rules for trimming in Richfield?
In Minnesota, you generally have the right to trim branches that cross your property line, but you should not damage the tree or trespass. We recommend talking with your neighbor first. If your HOA has rules about tree maintenance, check with them. We can advise on roof damage from overhanging limbs during our inspection.
Are you fully insured for work at my Richfield home?
Yes, we carry general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your property.
How should I maintain my metal roof in Richfield's climate?
Inspect your roof each spring and fall, looking for loose fasteners, debris in valleys, and snow guard damage. Remove leaves from gutters to prevent ice dams. After heavy snow, use a roof rake carefully to avoid scratching panels. We offer inspections and maintenance plans to keep your roof in good shape.
Why choose us?

Trusted professionals in Minneapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Minneapolis

All your work handled by qualified professionals in Minneapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

253+ Verified Client Reviews in Minneapolis

⭐⭐⭐⭐⭐ 4.9/5 · 253 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Minneapolis · Response within 24h · No commitment · ☎ (612) 326-1892

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Minneapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm