Serving the Minneapolis area  ·  (612) 326-1892  ·  Open Mon-Sun 7am-7pm
📞 (612) 326-1892 Free Quote

Metal Roofing in Burnsville, MN (55337) · Local Professionals

Minneapolis Metal Roofing · Fast response in Burnsville and the Minneapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+253Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Burnsville's rolling lots and 1970s-90s split-levels and two-story colonials take a beating from hail and ice dams. If your roof is showing its age, we can help.

Homeowners in Burnsville (55337) call Minneapolis Metal Roofing because we know the local housing stock, from the ramblers near Nicollet Avenue to the newer builds off County Road 42. We are fully insured and handle everything from storm damage repair to full metal roof replacement.

Metal Roofing in Burnsville (55337)

Burnsville's terrain is defined by rolling hills and glacial deposits, with many homes on sloped lots that require careful staging and drainage planning. The city's 1970s-90s subdivisions often feature complex rooflines with multiple valleys and transitions, which are prone to ice damming and wind-driven rain infiltration. Older neighborhoods near the Minnesota River Valley have mature trees that drop limbs and debris, accelerating wear on shingles and gutters. We understand these local conditions and tailor every metal roofing project to handle them.

Our team has served Burnsville and the surrounding Minneapolis area for years, installing standing seam, corrugated panels, and stone-coated steel roofs that shed snow and resist hail. We know the permit requirements for Burnsville and the surrounding communities, and we work with local suppliers to get materials that perform in our climate.

Our services in Burnsville

How a Job Works in Burnsville

Step 1: Call us at (612) 326-1892 or request a free on-site assessment. We will inspect your roof, discuss your options, and provide a written estimate. We will also help you understand insurance claim documentation if storm damage is involved.

Step 2: Once you approve the estimate, we schedule the work and pull the necessary permits with the City of Burnsville. Our crews are experienced with tight lot access and HOA coordination, and we keep you informed throughout the project.

Step 3: After installation, we clean the site thoroughly, haul away all debris, and walk you through the finished roof. We do not consider the job done until you are satisfied.

Metal roofing costs in Burnsville vary by material and complexity. For example, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. Repair jobs like leak fixes start at $450, and snow guards start at $1,200. Factors include roof size, pitch, access, and the condition of your existing roof. Call (612) 326-1892 for a free estimate tailored to your home.

My 1980s split-level in Burnsville has ice dams every winter. Can a metal roof help?
Yes. Metal roofs shed snow more effectively than asphalt shingles, especially when paired with proper attic insulation and ventilation. We often install standing seam with snow guards to prevent ice dams at the eaves. We will assess your attic and roof design to recommend the best solution.
A storm just blew through Burnsville and lifted some panels on my roof. How quickly can you respond?
We prioritize storm damage calls. Call us at (612) 326-1892 for a free inspection. We can often provide temporary repairs within 24-48 hours to prevent further damage, and then schedule permanent repairs or replacement.
What is the typical cost for a metal roof replacement on a 2,000-square-foot home in Burnsville?
For a 2,000-square-foot home, metal roof replacement typically ranges from $18,000 to $30,000, depending on material choice and roof complexity. Standing seam is at the higher end, while corrugated panels are more economical. We provide free estimates with detailed breakdowns.
Do I need a permit from the City of Burnsville for a metal roof installation?
Yes, a building permit is generally required for roof replacement or new installation. The City of Burnsville has specific requirements, and we handle the permitting process for you. We ensure all work meets local codes and passes inspection.
My HOA in Burnsville has design guidelines. Can you help with approval for a metal roof?
We can provide material samples, color chips, and documentation to help you get HOA approval. We are familiar with common HOA requirements in Burnsville and can suggest profiles and colors that are likely to be approved.
Are you fully insured for roofing work in Burnsville?
Yes, we carry general liability insurance and workers' compensation coverage. Your property is protected when we work on your roof.
How should I maintain my metal roof in Burnsville's climate?
We recommend annual inspections, especially after severe storms, to check for loose fasteners, debris buildup, and sealant condition. Keep gutters clear and trim overhanging branches. In snowy months, use a roof rake carefully to prevent ice dams. We offer maintenance plans and inspections.
Why choose us?

Trusted professionals in Minneapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Minneapolis

All your work handled by qualified professionals in Minneapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

253+ Verified Client Reviews in Minneapolis

⭐⭐⭐⭐⭐ 4.9/5 · 253 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Minneapolis · Response within 24h · No commitment · ☎ (612) 326-1892

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Minneapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm