Serving the Minneapolis area  ·  (612) 326-1892  ·  Open Mon-Sun 7am-7pm
📞 (612) 326-1892 Free Quote

Metal Roofing in Eden Prairie, MN (55347) · Local Professionals

Minneapolis Metal Roofing · Fast response in Eden Prairie and the Minneapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+253Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Eden Prairie is full of newer two-story homes with complex, cut-up rooflines, and those valleys are exactly where ice dams love to form. If you live near Round Lake or off Eden Prairie Road, you have probably seen the signs: icicles hanging heavy, snow backing up under shingles, and water stains on the ceiling.

We are Minneapolis Metal Roofing, and we have been helping homeowners in Eden Prairie (55347) and the surrounding Minneapolis area solve those problems with metal roofing that sheds snow and stands up to hail. Whether you are near the Eden Prairie Center or in a quiet neighborhood off Pioneer Trail, our team knows the local building stock and the weather that hits it.

Metal Roofing in Eden Prairie (55347)

Eden Prairie sits on rolling terrain with clay-loam soil, and many homes here back up to wetlands, ponds, or wooded lots. That means drainage matters. A roof that dumps snow and water in the wrong place can send it toward a foundation or a neighbor's yard. The newer two-story homes common in Eden Prairie often have steep pitches and multiple valleys, which are prime spots for ice dams and leaks. We see a lot of failed fasteners and separated seams after a heavy snow year, plus wind-lifted panels after summer storms. Our team is trained to handle those complex rooflines, and we pay close attention to flashing around chimneys and skylights, which is where many leaks start.

We have worked on homes throughout Eden Prairie and the Minneapolis area, from older ramblers near the Minnesota River bluffs to large suburban builds near Anderson Lakes. We know how local codes and HOA rules can affect your project, and we are fully insured with general liability and workers' compensation.

Our services in Eden Prairie

How a Job Works in Eden Prairie

Step 1: You call us at (612) 326-1892 or request a free estimate online. We schedule an on-site assessment at your Eden Prairie home, where we inspect your roof, check the attic if accessible, and look for signs of ice damming, leaks, or storm damage. We then give you a written estimate with clear pricing and options.

Step 2: Once you approve, we handle the work. In Eden Prairie, that often means coordinating with your HOA for color and profile approval, and pulling the required roofing permit from the city. We schedule around weather and make sure the job site is secure, especially on tight lots or where landscaping needs protection. Our crews are experienced with complex rooflines and steep pitches, and we keep you informed at every stage.

Step 3: After installation or repair, we clean up thoroughly. We magnet-sweep for nails, remove all debris, and do a final walkthrough with you to make sure you are satisfied. We leave your property clean and your roof ready for the next Minnesota season.

Pricing for metal roofing in Eden Prairie depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. For a free estimate tailored to your Eden Prairie home, call us at (612) 326-1892. We will give you honest numbers and no pressure.

My two-story home in Eden Prairie has a complex roofline with several valleys, and I keep getting ice dams. Can a metal roof help?
Yes. Metal roofs shed snow much better than shingles, especially when paired with proper underlayment and ice-and-water shield in the valleys. We often recommend standing seam for these homes because the panels have fewer seams where ice can catch. We also check attic insulation and ventilation, since those contribute to ice dams. Our team can assess your specific roofline and recommend the right system.
A storm just blew through Eden Prairie and lifted some panels on my metal roof. How quickly can you respond?
We prioritize storm damage calls in Eden Prairie and the surrounding area. Call us at (612) 326-1892, and we will schedule an inspection as soon as possible, often within a day or two depending on demand. We can tarp or secure the area to prevent further damage and provide a written estimate for repairs. We also document damage for insurance claims if needed.
What does a typical metal roof replacement cost for a home in Eden Prairie?
Most Eden Prairie homes fall in the range of $9 to $14 per square foot for a full replacement, depending on the material and roof complexity. A standard 2,000 square foot roof might run $18,000 to $28,000. Standing seam and stone-coated steel are at the higher end. We provide free estimates so you can get exact numbers for your home. Call (612) 326-1892.
Do I need a permit to install a metal roof in Eden Prairie, and how do I get one?
Yes, roofing permits are typically required for a full replacement or re-roof in Eden Prairie. The city's building department handles permits, and requirements can vary based on the scope of work. We are familiar with the process and can pull the permit for you as part of your project. We always defer to the local building department for final rules, and we make sure your job meets all current codes.
My HOA in Eden Prairie has design rules. Can you help with approval for a metal roof?
Absolutely. Many Eden Prairie HOAs have specific requirements for roof color and profile. We can provide product samples, specifications, and documentation to submit to your HOA. We have worked with HOAs throughout the area and can help you choose a metal roof that meets the rules and looks great. We also handle any property line questions by respecting setbacks and coordinating with neighbors if needed.
Are you insured for roofing work in Eden Prairie?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your Eden Prairie property. You can have peace of mind knowing our team is covered.
What maintenance does a metal roof need in Eden Prairie's climate?
Metal roofs are low maintenance, but in Eden Prairie's freeze-thaw cycles, it is smart to check fasteners and seals annually, especially after a heavy winter. We recommend a professional inspection every few years to catch loose screws or flashing issues early. Keeping gutters clear and removing debris from valleys also helps prevent ice dams. We offer maintenance plans and inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Minneapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Minneapolis

All your work handled by qualified professionals in Minneapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

253+ Verified Client Reviews in Minneapolis

⭐⭐⭐⭐⭐ 4.9/5 · 253 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Minneapolis · Response within 24h · No commitment · ☎ (612) 326-1892

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Minneapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm